• OG真人



  • 这是描述信息
    这是描述信息
    33

    33

    3

    3

    2

    2

    4

    4

    上一个
    下一个

    产品中心  Products Center

    搜索
    搜索
    全部分类
    1/1
    浏览量:
    1000

    764420 SEACARE OSD-2 25 LTR

    Unitor™ Seacare OSD-2™ is a type I oil spill dispersant. Unitor™Seacare OSD-2™溢油分散剂是一种可生物降解的烃类产品 ，具有高分散效率和低毒性。根据环境 ，食品和农村事务部（DEFRA）以前的英国农业 ，渔业和食品部（MAFF）的LR448规范，它被批准为I型分散剂
    浏览量:
    1000
    产品编号
    652-764420
    数量
    -
    +
    1
    产品描述

    Product information

    This product supersedes product no: 571562

    Unitor™ Seacare OSD-2™ is a biodegradable hydrocarbon based product with high dispersing efficiency and low toxicity. It is approved as a Type I dispersant according to LR448 specifications by the Department for Environment, Food & Rural Affairs (DEFRA) formerly UK Ministry of Agriculture, Fisheries and Food (MAFF).

    Definition
    Type I: Conventional hydrocarbon-base - for use primarily undiluted on beaches, but may also be used undiluted from WSL spray sets using breaker boards or other suitable means of application and agitation.

    Department for Environment, Food & Rural Affairs (DEFRA)

    APPROVAL OF THE USE OF SUBSTANCES PRODUCED FOR THE PURPOSE OF TREATING OIL ON THE SURFACE OF THE SEA

    Notes for guidance 1. Article 3 of the Deposits in the Sea (Exemptions) Order 1985 as read with paragraph 21 of the Schedule to it, provides that a licence is not needed under Part II of the Act to deposit any substance produced for the purpose of treating oil on the surface of the sea provided you meet the following conditions:

    • The substance is one, the use of which, is for the time being approved by the licensing authority; • The substance is used in accordance with any conditions to which the approval was subject; • No deposits made in an area of the sea of a depth of less than 20 metres or within one mile of any such area, save with the approval of the licensing authority; • Similarly a licence is not needed (if conditions are satisfied) for the loading of a vessel aircraft, hovercraft, marine structure or floating container in England and Wales, with products for deposit for the treatment of oil on the surface of the sea, within British Fishery limits (other than waters adjacent to Scotland).

    1. The Ministry of Agriculture, Fisheries and Food has tested this product for toxicity and found it to be satisfactory at the specified application rate. It has also been tested for efficiency and safety in use by AEA Technology Pic. And similarly found to be satisfactory.
    2. A person who deposits in the sea a substance not for the time being approved by the licensing authority for the purpose of treating oil on the surface of the sea or not within the terms of this approval, may be in breach of the terms of the Food and Environment Protection Act, 1985.
    3. A person who intends to use any substance for the purpose of treating oil on the surface of the sea should also consult the Nature Conservancy Council before beginning operations.
    4. Copies of the current Continental Shelf Operations Notice (CSON 7) are obtainable from the Department of Energy, Petroleum Engineering Division, Thames House South, Millbank, London SW1P 4QJ.

    Further information on the use of oil spill dispersants is contained in the Institute of Petroleum (London) publication "Guidelines on the Use of Oil Spill Dispersants" 2nd Edition (1988).

    Features

    • Approved Type I dispersant according to the latest LR448 specifications of AEA Technology Plc. covering both
      efficiency and toxicity for use in dispersing oil on sea, beaches and rocks
    • Disperses mineral oils, crude oils, residual fuel oils, diesel fuel oil, kerosene, white spirit and lubricant oils
    • For use on oil spills that may occur during loading or discharging of cargo or bunkers where allowed
    • For cleaning of spills on deck, ships side, piers, wharfs, etc. where allowed

    Benefits

    • Raised standards for operator safety in handling and use, being biodegradable and having low toxicity and a high flash point
    • Rapid efficient dispersal of a wide range of oil residues. Converts hydrocarbons into very fine emulsions
    • Ready to use product

    Specification

    Approvals

    • This composition meets the criteria for not being harmful to the marine environment according to MARPOL Annex V and may be discharged into the sea when used to clean cargo holds and external surfaces on ships.

    • Approved as a type I dispersants according to LR448 specifications by MMO (Marine Management Organisation) for oil spill treatment applications in the United Kingdom

    Directions for use

    Oil Spills at Sea

    Unitor™ Seacare OSD-2™ is used undiluted by direct spraying to clean up oil spills at sea. Allow some time for the oil to absorb the Unitor™ Seacare OSD-2™ and then disperse mixture by vigorous agitation using fire hoses, the ship's propeller, breaker boards towed behind work boats, etc. Unitor™ Seacare OSD-2™ should not be used in an area of sea of a depth less than 20 metres or within one mile of such areas exept in accordance with the advice of the local District Inspector of Fisheries of Ministry or Scottish Office Agriculture, Environmental and Fisheries Department (SOAEFD).

    Oil on Beaches and Shore Line
    Unitor™ Seacare OSD-2™ should be applied neat by spraying over oiled areas. Allow time for the oil to absorb the Unitor™ Seacare OSD-2™ then follow by washing down the beach or rocks, etc. The treatment rate depends on the type and thickness of the oil spill, also on the age and condition. Under conditions where it is a thin slick of oil, 1 litre of Unitor™ Seacare OSD-2™ is enough to treat approximately 10 square metres of oil. In many cases, several applications may be necessary.

    Oil Spill on Deck
    Remove as much of the oil as possible, then spray Unitor™ Seacare OSD-2™ over area covered by the oil and allow some time for it to be absorbed. Disperse the mixture with water by means of a fire hose. Depending on type of oil it may be necessary to use several applications.

     

    产品特性

    • 根据AEA Technology Plc的最新LR448规范批准的I型分散剂。涵盖两者用于将油分散在海洋，海滩和岩石上的效率和毒性

    • 分散矿物油，原油，残余燃料油，柴油燃料油，煤油，白酒和润滑油

    • 用于在允许的货物或燃料装载或卸除过程中可能发生的溢油事故

    • 用于清洁甲板，船侧，码头，码头等处的溢出物

    优势

    • 提高操作员在处理和使用时的安全标准 ，可生物降解且具有低毒性和高闪点

    • 快速有效地分散各种油残留物。将碳氢化合物转化为非常精细的乳液

    • 随时准备使用产品

    定义

    I型 ：常规烃基- 主要用于在海滩上未稀释的，但也可以使用破碎板或其他合适的施用和搅拌方式从WSL喷雾装置中稀释使用 。

    环境，食品和农村事务部

    （DEFRA）

    批准在海洋表面处理油的目的而使用的物质的使用指导说明1.存款的第3条

    1985年海（豁免）令 ，附有段落

    该附表第21条规定 ，如果您符合下列条件，则根据该法第II部分不需要许可证，以便存放为在海面上处理油而生产的任何物质：

    • 该物质是一种物质 ，其使用目的是暂时由许可证颁发机构批准; •该物质的使用符合批准的任何条件; • 除非获发牌当局批准 ，否则不得在深度小于20米的海域或任何该等范围的一英里范围内进行沉积; • 同样地，在英格兰和威尔士装载船舶飞机，气垫船 ，海洋结构或浮动集装箱时，不需要许可证（如果条件满足） ，在英国境内装有用于处理海面上油的沉积物的产品。渔业限制（苏格兰附近的水域除外）。

    1. 农业 ，渔业和食品部已经对该产品进行了毒性测试，发现它在指定的施用率下是令人满意的 。它还经过了AEA Technology Pic的使用效率和安全性测试。并且同样发现令人满意。

    2. 在海洋中存放的物质，并非当时由发牌当局批准，以便在海面上处理油类或不在本批准的范围内，可能违反食物的条款和环境保护法，1985年 。

    3. 打算使用任何物质以处理海面上的油的人 ，也应在开始作业前咨询大自然保护协会。

    4. 目前的大陆架运营通知（CSON 7）的副本可从伦敦泰晤士大厦泰晤士河南大厦能源部获得 ，SW1P 4QJ。

    关于使用溢油分散剂的进一步信息包含在石油学会（伦敦）出版物“使用溢油分散剂指南”第2版（1988）中 。

    订购信息

    Product number

    Product name

    Quantity

    764420

    SEACARE OSD-2

    25 LTR

    764422

    SEACARE OSD-2

    210 LTR
     

     

     

    认证

    • 根据MARPOL附则V，该组合物符合不对海洋环境有害的标准 ，用于清洁货舱和船舶外表面时可排入海中。•根据美国商务部的LR448规范批准为I型分散剂

    环境，食品和农村事务（DEFRA）前英国农业，渔业和食品部（MAFF）。见上文定义•由MMO（海洋管理组织）批准作为I型分散剂用于英国的溢油处理应用

    使用说明

    海上油污溢出OSD-2™通过直接喷洒未经稀释而用于清理海上溢油事故 。留出一些时间让油吸收Seacare OSD-2™和然后使用消防软管 ，船舶螺旋桨，拖曳在工作船后面的破碎板等剧烈搅拌驱散混合物.Seacare OSD-2™不应用于深度小于20米或距离该区域一英里的海域除非根据当地渔业部检查员或苏格兰农业，环境和渔业部（SOAEFD）的建议。

    海滩和海岸线上的油Seacare OSD-2™应该通过喷洒油污区域来整洁地涂抹 。留出时间让油吸收Seacare OSD-2™，然后冲洗海滩或岩石等。

    处理率取决于溢油的类型和厚度 ，也取决于年龄和状况 。在油润滑的条件下，1升Seacare OSD-2™足以处理约10平方米的油。在许多情况下，可能需要多个应用程序 。

    甲板上的油溢出尽可能多地去除油，然后在油覆盖的区域喷洒Seacare OSD-2™，并留出一些时间让它被吸收。

    通过消防水带将混合物用水分散。根据油的类型，可能需要使用多种应用 。

    注意：请勿将此溢油分散剂与任何其他产品混合使用。

     

    未找到相应参数组 ，请于后台属性模板中添加

    版权所有：江苏OG真人贸易有限公司 备案号 ：苏ICP备17042192号-1 网站建设：



  • XML地图